Accessories

- Electric repair stand is not just powerful, but also smart. It features endless height adjust, but it can also lift or descend a bike automatically with a push of a button. It also stops on its own when bike reaches the ground. - Endless height adjust, travel adjust limiters, internal routed cables - Equipped with Master shop repair clamp 1693.1M - Secures directly to the floor or on a heavy-duty metal fixed plate - Measurement: W750xL750xH2072 mm - Weight: 106 kg (with a steel fixed plate) - Load capacity: 400N (40kg)

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB

In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Every innovation in Quarq's DZero platform represented the 10+ years of Quarq's advances in power meter technology. This same platform is now combined with XX1 Eagle DUB CARBON TUNED crankset—lightest, stiffest, and strongest to date, and X-SYNC 2 chainring—providing significantly quieter performance with better mud clearing and extraordinary durability. Ready to power every ride. - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero: automatically checks and recalibrates your power meter as you ride (no need to manually calibrate) - AxCad: no cadence magnet required - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy: within 1.5%, measuring both legs

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The XX SL Eagle AXS Transmission Power Meter Crankset combines the XX SL crank arm with an integrated power meter. All-new spider design uses a proprietary chainring mount system which reduces weight without compromising reliability. Dual sided power measurement calculates total watts. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS enabled components. - Compatible with Flight Attendant. +/- 1.5% accuracy. - User replaceable CR2032 battery 200-hour battery life. - Bluetooth low energy technology and ANT+ wireless data transfer. - AxCad -- no cadence magnet required. - Waterproof (IPX7 waterproof to 1 meter for 30 minutes). - SRAM Model ID: FC-XX-SLP-D1

A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups - BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive - BO-2 Bottle Opener - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DCW-1 Double-Ended Cone Wrench: 13/14mm (2) - DCW-2 Double-Ended Cone Wrench: 15/16mm (2) - DCW-3 Double-Ended Cone Wrench: 17/18mm - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HCW-15 36mm/32mm Headset Wrench - HMR-8 Shop Hammer - HT-8 8mm Hex Tool - HXS-1.2 Hex Wrench Set - LP-7 Utility Pliers - MLP-1.2 Master Link Pliers - MW-8 Metric Wrench: 8mm - MW-9 Metric Wrench: 9mm - MW-10 Metric Wrench: 10mm - PAW-12 12" Adjustable Wrench - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SZR-1 Shop Scissors - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set

This custom Li-Ion Turbo Vado Battery features a 604Wh capacity and is compatible with all Turbo Vado models. It's fully integrated with the frame, removable for easy charging and lockable for added security. - Please Note: The Turbo Vado Battery does not include a battery cover. - Battery features a 604Wh capacity. - Works with all Turbo Vado models. - Lockable and down tube integrated. - Chargeable either on- or off-the-bike. - Includes LED power indicator.

Give someone a shopping spree to Trail Head Cyclery! We get it, sometimes finding that perfect gift can be tough. That's why we offer gift cards to the shop and these sure do make a perfect gift for any rider. They're always the right size and color, too. We can mail the card to you or the intended recipient. Just enter the appropriate address in the "Ship To" field during checkout and we'll mail out the gift card directly to them *Gift cards are for in-store redemption only*

The most versatile bike rack for all types of bikes Thule Epos bike rack fits all types of bikes and is fast, easy and convenient to use – it takes minimal effort to mount bikes thanks to an innovative telescopic bike attachment system. The bike arms simply let you attach your bike anywhere on the frame or the rear wheel, providing you with numerous attachment options. You can load and unload up to two bikes in any order – all types of frames and geometries are supported, including ebikes, mountain bikes, gravel bikes, and bikes with fenders and racks. It's all about the details Thule Epos is designed to maximize your time on the bike with smart solutions that make handling your bikes easy.It is fully foldable for easy transportation and storage, and tiltable for trunk access. The bike carrier is made to take good care of your bikes – generous spacing between bikes, accommodation for extra long wheelbases and easy fastening of large tires will give you a great time cycling. Add to the experience Accessories designed for riders that loves their bikes. Protect against theft with Thule High Grade Lock, developed with industry leader ABUS. And because ebikes can weigh a lot, Thule Foldable Loading Ramp for easy loading and unloading of heavier bikes. All Features: Compatible with all types of bikes and ebikes Fast and easy loading and unloading of all types of bikes and ebikes. The patented telescopic bike arms with?pivoting cradle and steel reinforced straps attach to the bike frame or rear wheel. High load capacity The high load capacity of 66lb (30kg)/bike & max load capcity of 132lb (60kg) makes it possible to transport heavy ebikes Generous spacing between bikes Generous 9.8" (25cm) distance between bikes reduces risk of bike-to-bike contact Made for long wheelbases Extra-long wheel holders enable easy transport of bikes with long wheelbases, up to 53" (1350mm) Easy fastening of large tires Ratcheting pump buckles and wheel straps for easy fastening of tires up to 3,2” (up to 5" tires with a separately sold accessory) Fully foldable design Fully foldable for convenient installation, handling, and storage Easy trunk access With bikes mounted, the trunk is accessible with an outboard smart foot pedal tilt. Without bikes, the trunk is accessible without tilt Quick mounting Tool-free AutoAttach system with easy grip lever allows for simple and secure mounting and removal of rack Easy to transport Ergonomic transport of the bike rack thanks to the integrated carrying handles and convenient transport wheels Locks for safety Locks your bikes to the bike carrier and your carrier to the car (locks included). The Thule High-Grade Lock developed together with ABUS is sold as a separate accessory. Great accessories Wide range of innovative accessories available such as the Thule High Grade Lock, developed by ABUS, for added security, Thule Epos Light and Plate Kit for maximum safety and visibility, and Thule Epos Storage Bag for convenient and protective storage (accessories sold separately)

The safest and easiest way to travel with your mountain bike, with an integrated work stand for proper assembly and maintenance along the way. - Safely transports almost all mountain bikes, fitting wheelbases up to 130cm and tires up to 29 x 3.0" - Included work stand makes bike maintenance, assembly, and disassembly easier while traveling or at home - Easily fasten the bike to the workstand inside the case for safe and secure transport - Padded interior packing panels are tailored to protect all parts of the bike during transport - Rigid side panels are reinforced with 5mm corrugate polypropylene and a molded HDPE bottom tub provide superior protection - Folding sidewalls collapse and secure tightly for compact storage (just 144 x 38 x 24cm) at the travel destination or at home - Swiveling front wheel makes for effortless maneuvering through airports and can be stored conveniently inside the case at baggage check to ensure the stability of the case when loading or in storage - Brake rotor pockets are located in the optimal packing position and protect rotors from bending stress while traveling - Drivetrain wrap protects rear derailleur, chain, and bike frame from damage while traveling - Work stand fork mount fits all front axle sizes, including 15x110 boost, 15x100, 20x110, 12x100, 9mm quick release

Easy moving trolley tool station with 5” wheels and seven tool compartments containing 55 professional shop quality bike tools (85 functions). Wheel base can be easily pulled out to extend working base for better stability. Push button Lift Handle opens tool trays for quick and easy repairs. - Tools: 55 - Functions: 85 - Compartments: 7 total, includes - 5 tool trays and 2 component trays - Hex Wrenches: 2 / 2.5 / 3 / 4 / 5 / 6 (2 pcs) / 8 / 10 mm - Allen Bits: 3 / 4 / 5 / 6 mm - Torx Wrenches: T7 / T9 / T10 / T15 / T20 / T25 (2 pcs) / T27 / T30 - Torx® Bits: T25 - Chain Tool: Hardened steel - Chain Hook: Hardened steel - Chain Wear Indicator: Hardened steel - Screw Drivers: 4 / 6 mm flat head, #1 / # 2 Phillips - Spoke Wrenches: 13G / Shimano® 4.3 mm, 14G / 15G, Mavic® M7 / M9 - Box Wrenches: 7 mm - Open Wrench: 7 / 8 (2 pcs) / 10 (2 pcs) mm

The standard of the bike industry for over 40 years, the PRS-2.3 clamps two bikes and rotates horizontally 360 degrees, allowing one bike to be swung out of the way to work on another. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-2.3-1 features our 100-3C Adjustable Linkage Clamps, with a time-tested design and straightforward operation. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 1.625" (22–41 mm) diameter tubes - Clamp jaws are nominally 4" (100 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #135 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades. Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm - BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II - BBT-22 Bottom Bracket Tool - BBT-69.2 Bottom Bracket Tool - BO-2 Bottle Opener - CBW-1 Open End Wrench: 8/10mm - CBW-4 Open End Wrench: 9/11mm - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DAG-2.2 Derailleur Hanger Alignment Gauge - DH-1 Dummy Hub - DP-2 Threaded Dummy Pedal - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HMR-8 8 oz. Shop Hammer - HXS-1.2 Hex Wrench Set - MLP-1.2 Master Link Pliers - NP-6 Needle Nose Pliers - PAW-6 6" Adjustable Wrench - PH-1.2 P-Handle Hex Wrench Set - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SBC-1 Spoke, Bearing and Cotter Gauge - SBS-1.2 Socket and Bit Set - SCW-13 13mm Shop Cone Wrench - SCW-14 14mm Shop Cone Wrench - SCW-15 15mm Shop Cone Wrench - SCW-16 16mm Shop Cone Wrench - SCW-17 17mm Shop Cone Wrench - SCW-18 18mm Shop Cone Wrench - SCW-19 19mm Shop Cone Wrench - SP-7 Side Cutter Pliers - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SWR-8 3/8" Drive Ratchet Handle - SZR-1 Shop Scissors - TL-1.2 Tire Lever Set - TL-4.2 Tire Lever Set - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set - UP-SET Utility Pick Set - VC-1 Valve Core Tool - ZP-5 5" Flush Cut Pliers

- Well thought out, extremely durable tool pallets organize and hold your tools in place. Pockets are designed with the size of our tools in mind. It also features a few extra pockets leaving you room to personalize your kit. - 48 pieces of our tools that are a perfect fit for a portable set, shop, home or team mechanics

The fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. Thule EasyFold XT 2 hitch bike rack is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for a wide range of bikes and e-bikes. Loading heavy bikes is effortless and with the optional loading ramp, it’s even easier. This durable bike rack also gives you full access to the trunk even when bikes are loaded. Fold the bike rack to a compact size and stow it in your trunk, perfect for an impromptu bike adventure. For unusual bike geometries or oversized frames, bring your bike to one of our Thule dealers and test it out. Features: - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into the rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in the receiver and locks the hitch rack to the vehicle

It looks like it’s from the future, but it’s here now. Our lightest, stiffest, and most accurate integrated power meter and chainring combo is now on Force. Quarq D-Zero technology is accurate to +/-1.5% and isn’t affected by temperature changes, and the consistent 13-tooth gap on the rings ensures fast and reliable shifting. Not just unbeatable on performance, our integrated rings are also incredibly long-lasting. And let’s not be modest: the combination of these rings on our iridescent carbon crank arm is the best looking thing out there. FEATURES - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability and simplicity

The Bosch PowerPack 500 is the same size as the PowerPack 400 and only slightly heavier, but offers a longer range. When using the Bosch Standard Charger, this lithium-ion battery requires about two hours to charge to 50% and approximately 4.5 hours to charge fully. Once fully charged and together with the Performance Line Cruise, the eBike can ride up to 56 miles. The PowerPack 500 comes as a frame or rack model for all eBike product lines.

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference - Carries up to 4 bikes with Thule T2 Pro XT Add-On (sold separately, 9036XTB, 2" receiver only)

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Transport your rides and save your back, too, with Hollywood's Sport Rider rack that carries up to four bicycles. Simply set any bike into the wheel holders (that are nice and low for easy bike mounting), then slide the padded universal clamp over the frames to secure the bikes. This great rack also includes Hollywood's No-Wobble system that prevents rack sway and holds your bikes steady even when the road is less than ideal. For even more convenience, the Sport Rider is designed as a 2+2, so you can use it as either a 4-bike or 2-bike rack. And, it folds down when not in use for easy transport, storage, and cargo door access. - Capacity: Four Bikes/180 lbs (max. 45 lbs per bike) - Hitch Size: 2-inch only - Not to be used on any trailer, fifth wheel, or towed vehicle

Premium hanging hitch bike rack providing superior bike protection and unobstructed access to the rear of vehicle. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Easily fold down bike arms when rack is not in use - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Convenient access to the rear of the vehicle, even with bikes attached, due to the patented swing-away design - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily opens and closes with the pull of a pin Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.2 x 11 x 40.2 in - Folded dimensions: 15.2 x 11 x 40.2 in - Weight: 42 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

A premium aluminum platform bike rack is fully lockable, easy to use, and holds bikes without frame contact. Features: - Quickly attach bikes and easily secure them to the rack using the ratcheting wheel loops - Aluminum construction makes it easy to use, install and remove - Effortlessly fold down bike arms when the rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down, even with bikes on it - Lock bikes to the rack using the integrated cable lock (lock included) - Fits 26"-29" wheel sizes up to a 3" wide tire - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included)

D4…Redefining Everything The Daytona helmet series redefined the marriage between technology, safety and artistic design. The Troy Lee Designs D4 Carbon Helmet changed the game once again. We were able to strategically increase strength and durability while keeping the overall weight to a premium. This model also features integrated MIPS Brain Protection System, lightweight titanium D-rings, a collarbone suspension system and quick release XT2 3D cheek pads and Ionic washable liner. - MIPS brain protection system, reduces rotational forces to the brain in some crash scenarios - Three shell sizes to more accurately fit a variety of head sizes and rider ages, improving overall safety - Removable snap-in, washable comfort liner with Coolmax® and Dri-lex® moisture-wicking materials - Super light titanium D-rings save weight and have increased material tensile strength - CPSC 1203*, CE EN1078*, ASTM F1952-DH, ASTM 2032-BMX. *Varies by regional standards

- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)

- The PRS-2.3.1 is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use. - Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3", fully adjustable clamping pressure, narrow 2.7" clamping jaws) - Clamps two bikes simultaneously - Clamps rotate 360 degrees horizontally and vertically - Heavy gauge, chrome plated steel tubing for rigidity and years of trouble free use - Clamping height easily adjusts from 50" to 62" (128cm to 158cm) using heavy duty lock block and locking pin system - Includes aluminum work tray - #135 Steel Base Plate sold separately - Use FP-2 Floor Mounting Plate to mount stand directly to floor (sold separately)

Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 334g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.

- SnugTite Stinger positions the rack securely into the hitch receiver - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Ratcheting arm and wheel tray secure bikes quickly without frame contact - Easily adjustable trays move side to side to create generous spacing between the bikes - Tool-free AutoAttach system makes it easy to install and remove the bike rack - Fits carbon frames, mountain bike, downhill bikes, 20—29" wheels, and up to 3" tires without adapters. Fat bike adapter kit sold seperately - Includes the Thule One Key System to lock the rack to the vehicle - Maximum bike weight is 50 lbs / 23kg per bike

Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included

The XX Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle utilizes SRAM's World stage proven XX crank arm with a subtly integrated power meter to record and deliver live, accurate power readings to your head unit. We achieve this by utilizing what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery giving you an edge over the competition. - Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration - Compatible with RockShox Flight Attendant - +/-3% accuracy means you'll always know your true watts output - Long battery life provides 400+ hours of usage - Waterproof (IPX7 waterproof to 1 meter for 30 minutes - Right arm, Bottom bracket, Chainring and Spider NOT included

Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

Whether visiting friends, enjoying a ride on city roads, or doing some errands with the eBike, the PowerPack 400 delivers the power you need. The lightweight lithium-ion battery is easy to install and remove or can simply be charged using the charging socket on the eBike. Its long service life, compact and easy-to-install design mean that the PowerPack 400 is not only reliable, but also strong on performance. The PowerPack 400 comes as a frame or rack model for all eBike product lines.

It’s the best of both worlds. A light and stiff direct mount chainring with accurate Quarq power measurement elegantly hidden inside the DUB spindle lets you stealthily gather the data you need to progress. So you can focus your attention on the stunning finish of the carbon fiber crank arm. FEATURES - DUB-PWR spindle-based unit measures left side power to calculate total watts - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Compatible with 135mm and 142mm rear spacing

It’s the best of both worlds. A light and stiff direct mount chainring with accurate Quarq power measurement elegantly hidden inside the DUB spindle lets you stealthily gather the data you need to progress. So you can focus your attention on the stunning finish of the carbon fiber crank arm. The wide chainline crankset fits in road and MTB bottom bracket standards so frames can fit wider gravel tires. FEATURES - DUB-PWR spindle-based unit measures left side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - Compatible with 135mm, 142mm and Boost rear spacing

With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims

- Bring it all - Designed for full full-size and compact pickup trucks, this bed level truck rack is perfect for carrying a rooftop tent, basket and other equipment up to 220lbs. - Includes two crossbars and four mounting feet - Made from durable, corrosion corrosion-resistant aluminum for years of use - Includes the Thule OneKey system to lock the truck rack to the truck bed - 2 sizes available: Full Full-Size & Compact

- Bring it all - Designed for full full-size and compact pickup trucks, this bed level truck rack is perfect for carrying a rooftop tent, basket and other equipment up to 220lbs. - Includes two crossbars and four mounting feet - Made from durable, corrosion corrosion-resistant aluminum for years of use - Includes the Thule OneKey system to lock the truck rack to the truck bed - 2 sizes available: Full Full-Size & Compact

The Bluegrass Legit Carbon Helmet is a premium race-day full-face helmet. Developed for competitions, it exceeds all of the certifications for racing downhill and enduro. - The Legit Carbon features a flexible safety-release visor to avoid twisting of the neck in impacts from any angle. - Designed with hearing vents to help riders maintain balance and hit their optimum performance levels - The Legit Carbon uses a carbon fiber outer shell paired with a multi-impact EPS liner to achieve the finest blend of high-impact performance and low-weight - Vents and air channeling are optimized for all-day park sessions, with two large exhausts working in synergy with the EPS channels, to keep you cool at both high and low speeds - Featuring the MIPS E5-4® brain protection system, the BLUEGRASS Legit Carbon is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion - The Legit Carbon is suitable for all head shapes and sizes, thanks to its meticulously refined internal shaping - The comfort is boosted even more by the snap-in soft padding - Durability and quality are enhanced by an injected PU foam paired with the chin guard and three polycarbonate shells strategically molded on the EPS liner

Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity. - Smooth rolling integrated wheels - Extendable handle - Dust and water resistant - Air pressure compensation valve - Custom designed tool-holding pallets with loops and pockets - Gas assisted lid struts for easy opening - Dual-sided upper and mid level folding pallet wings - Front tool pallet that stores safely inside during transport - Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

Redesigned! We've made the base stronger for better stability. One-size-fits-all conical thru-axle adapters are now included with the stand, and are held in place by magnets when not in use. The arms have been made longer to accommodate 29+ wheels better and the calipers widened accordingly. Threads, springs and bearings were all revised resulting in smoother operation plus less frequent calibration. Additionally, we include white high-gloss stickers you can apply to the base and caliper arm to improve background contrast, making it easier than ever to use. -Stronger base for improved precision -Longer and redesigned upright arms for improved clearance of 29+ wheels -Wider calipers for increased clearance of 29+ wheels -Accommodates wider axles, works with through axle hubs up to 197mm width (include the use of adapters). Max. arm opening 230mm (without the use of adapters). -New bearings on the upright arm adjust axle are spring loaded for improved precision and reduced frequency of calibration -Redesigned caliper tips for easier radial truing -Revised threads and springs for smoother operation -8mm bench mount holes at the bottom, 268 mm center to center -Slicker design, all black. Includes white high gloss stickers, covering the base and caliper arm, for improved background contrast (stickers are not preapplied) -Comes with conical magnetic through axle adapters – one size fits all (12, 15 and 20). The adapters are now magnetic and can be affixed anywhere on the base. Features a bolt for more permanent fix on the upright arms. Compatibility: -Accepts wheels from 16 to 29+ inch with or without tire. Supports solid, quick release and through axle hubs -Accepts hubs up to 197mm when using our thru axle adapters, 230mm without. -Through axle hubs are supported with use of the adapters (included) -One pair of through axle adapters support all sizes of through axles

The flexible design fits more bikes than any other hitch rack in its price range. - Fits nearly all bike styles including 16-29" wheels, up to 5" wide tires, and wheelbases up to 52" right out of the box - Adjusting, installing and removing requires minimal effort, as it is one of the lightest platform hitch racks on the market at only 37.5 lbs - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Lock the bikes to the rack and the rack to the receiver keeping everything safe during transport or when parked - Easily transfers between 1.25" and 2" hitch receivers

This add-on to Thule's premium T2 Pro XT platform hitch rack allows 4 bike capacity (2"/50mm receivers only). - Lock bikes to the rack with the integrated cable lock - Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts - Secure bikes quickly without frame contact with the frame free ratcheting arm - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Premium hanging hitch bike rack providing superior bike protection and multiple size options to fit the needs of two people or an entire family. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 5.5" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easy to carry and handle, thanks to integrated grab handle - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 5 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 37 in - Folded dimensions: 15.4 x 11 x 37 in - Weight: 35 lb - Distance between bikes: 5.5 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding. - Only available for purchase at your local dealer. - 160Wh capacity delivers up to one additional hour of riding. - Compatible with Turbo SL Bikes. - Includes a 3 LED charge-level indicator. - SL Range Extender Cable 220mm ROAD 98920-5655 SOLD SEPARATELY. - SL Range Extender Cable 160mm MTB 98920-5650 SOLD SEPARATELY.