Components

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers. The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo. Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could. We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers. - It is super leightweight (24g without clamp) - It is made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - It has an unrivaled finish and touch - You have individual mounting points to adjust position - It has an integrated cable tensioner - Triggy can can clamp the cable by a set screw or it can hold the cable nipple and is compatible with any cable actuated dropper. Features: - Super leightweight (24g without clamp) - Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - Exceptional finish and touch - Individual mounting points to adjust position - Integrated cable tensioner - 12.5 mm of maximum cable pull 1 set Triggy includes: Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster) Shift cable Shift cable endcap 1x "Splits" clamp or I-Spec adapter (optional)

- Plastic guide and clamp with TPE elastomer for quiet, smooth chain retention - Zip-Ties quickly onto a variety of chainstays - Split design fits over the gear cable and chain, No disassembly required - Pivoting chain tube follows the chainline on 2 or 3 chainring setups

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 76g

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8\EC49/40/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 97g

Replacement seals for servicing Cane Creek rear shocks.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Fits Chris King ISO SD Front, and Classic Rear

CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry. As our customers say, “It’s a no-brainer for E-MTBs.”

CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry. As our customers say, “It’s a no-brainer for E-MTBs.”

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

- Grade 10 chromium steel balls

- Grade 10 chromium steel balls

ABI Headset Bearing for new builds or replacements.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Brass compression olive for Hope hydraulic disc brakes.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. Specialized Offset - This crank model is most suitable for Specialized Turbo systems using the ISIS mount including: Levo, Kenevo, Vado, Como, Turbo Levo e-bikes. Please note this model is not suitable for any Levo SL MTN E-Bikes using the Specialized SL 1.1 M30 motor. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminium MTB cranks. The latest FEA analysis tools, rigorous lab testing and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested and manufactured in Barnoldswick, UK. KEY FEATURES - Updated for 2019, 15% lighter and stiffer than previous model - Self-extracting axle/arm interface for ease of fittingVersatile Spline mount for chainring or spiderless chainrings - 155, 165, 170 and 175mm length - 30mm oversize 7075 aluminium alloy axle - Arms available in black, silver, bronze, blue, red, purple and orange - Range of axle length options available to accommodate most bikes from XC, DH and FAT bikes, including a new SuperBoost version - Weight from: 560g, (170mm Inc axle) - Forged and CNC machined 7150 series aluminium alloy crank arms - Chainring mounting: 9, 10, 11 and 12 speed compatible - Spiderless Retainer chainrings 28T to 36T - Spider Single 104BCD and Double 64/104BCD (with provisional room for a bash guard on all spiders)

Hope Mono M6 Disc Brake Pads • Organic: Softer compound than sintered, works better in dry conditions, but wears faster • Sintered: high-graphite compound; best for wet-weather durability

The Tech 4 E4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Increased power versus Tech 3. Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. Hinged clamp reducing weight and ergonomics. Shifter integration improved for more adjustability. Tool free bite point and reach adjustments. Rigid CNC machining. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for E4 caliper 2.3mm