Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Handlebar Grips/Tape
$17.00
Chromag teamed up with Brandon Semenuk to create the Liaison Wax Grips. They're perfect for riders who want the cushion and feel of an ‘all rubber’ grip (without plastic core). At 150mm, the Wax Grip is extra wide for lots of hand position leeway. It features a small flange on the inside.
$27.00
The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge.
We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends.
After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.
$31.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
$31.00
Chromag's Palmskin grip is designed for riders who like a softer, supple feel and may prefer not to use gloves. The ribbed pattern is compliant under the hand while managing moisture by channeling it away into the groove.
$31.00
Chromag's Squarewave grip is designed with performance and comfort as the paramount goals. The gentle bulge fits nicely in the cup of the hand to promote long ride comfort. The progressive tread is finest/softest where it meets the outer edges of the hand and coarsest under the meat of the palm for a balance of compliance and control over longer rides.
$34.00
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
$34.00
• Larger diameter model for bigger hands, offers extra cushion • Same bulged center as the original Squareweave • Aluminum clamps secure the grip on both for twist-free performance
$20.90
Cinelli Cork tape is available in many colors and includes plugs.
- Plugs included
$7.99
Dimension Classic Cruiser Grips available in black and white.
- Flange: No
- Grip Shift Specific: No
- Length: 140mm
- Lock On: No
- Shape: Round
- Weight: 104g
$9.99
Dimension Cork Grips are the classic style grip for cruisers or mountain bikes.
- Flange: Yes
- Grip Shift Specific: No
- Length: 125mm
- Lock On: No
- Shape: Round
- Weight: 26g
$40.00
Features and Benefits
- 250cm in Length—accommodates bars up to 50cm
- Grip compound maintains traction when wet
- Durable stretch for installation
- Vibration-damping backer strip
- Hard-wearing construction
- 3mm thick
What It Is
ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability.
Science & Insight
For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.
$17.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included.
- 50 Grams
- Standard Grip Length – 5 1/8"
- Installed Dia. 30mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$18.99 - $19.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included.
- 60 Grams
- Standard Grip Length – 5 1/8"
- 32mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$19.99
Love the size of Chunky but desire extraordinary?
Ribbed has 8 distinct ribs that optimize shock absorption and grip!
- 60 Grams
- Standard Grip Length – 5 1/8?
- 32mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
*Install Bar Plugs first for the protection of grips and ease of installation
*Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included.
- 80 Grams
- Standard Grip Length – 5 1/8"
- Installed Dia. 34mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$24.99
Our largest most shock absorbing grips!
Fatty’s have plush 8 pillows to optimize shock absorption and grip!
- Fits most handlebars
- Made from 100% Silicone
- Latex & Rubber Free
- Made in the USA
- 35mm thickness
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
*Install Bar Plugs first for the protection of grips and ease of installation
$24.99
Chunky XL 6.75” are over 30% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$30.99
Extra Chunky XL 6.75” are over 30% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
Great for riders with wider bars:
- Fat Bikes
- Touring bikes
- Track and pursuit bars
- Fixed Gear
- BMX
- Scooter
- Exercise Equipment
- And so much more!
* Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$30.99
Chunky XXL 8.25” are over 60% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$31.99
ESI’s ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically.
Fit SG grips give you the perfect flat platform with a double step-down ledge for excellent grip while driving through corners and the perfect braking position. The open texture with micro ribs gives you supreme contact. You will want to get your hands on these!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
- *Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$31.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky.
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$37.99
Extra Chunky XXL 8.25” are over 60% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
Great for:
- Exercise Equipment
- Touring bikes
- Track and pursuit bars
- Fixed Gear
- BMX
- Scooter
- Cruiser
- Road drop
- Strollers
- And so much more!
*Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$150.90
Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
BENEFITS:
ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade!
- Easy to Install
- Hassle Free
- Self-Bonding
- No Residue
- No Adhesives
- UV Resistant
NO CLEAN UP:
The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed!
USES:
There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs.
Some other great uses include:
- Tool Handles
- Finishing Tape
- Protecting Wear Points
- And Much More
The possibilities are endless!
$14.99
Easton's Pinline Bar Tape keeps your hands happy on long rides. Soft, supportive foam material delivers comfort while an adhesive backing makes sure the tape stays in place. Embossed Easton logos keep things looking classy.
$29.99
Adhesive gel backing, anti-shock foam, and the soft feel of microfiber cloth will keep your hands happy on even the longest rides. Easton's Microfiber Bar Tape is cushy without deadening road feel and doesn't get slippery when wet.
$12.99
This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs.
- Includes Eclat nylon bar plugs
- Longer design for today's wider bars
- Manufactured in the USA by ODI
$24.95
NEW SUPERLIGHT XC GRIP FOR 2022!
In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany!
- Size Small: 32mm / 80 grams
- Size Large: 34mm / 95 grams
- Use: XC, Marathon, Bikepacking, Endurance
- Grip material: proprietary AirCell Rubber
- SGS Certified for purity and quality
- Right and Left hand specific grips.
- Completely new grip material for increased damping on your favorite trails.
- Optimized form allows for reduced gripping force.
- Grip zones are matched to the hand.
- Replaceable end plug.
- Carbon bar compatible.
- No inner core.
- No locking clamp.
$24.95
Thinner, lighter, faster. Reduced to the essentials, the Ergon GXR Team does exactly what cross-country riders and racers desire: absorb shock, offer a secure grip, extremely lightweight, and an ergonomic fit. The GXR Team is a further refinement of the first truly ergonomic lightweight grip made of AirCell Rubber, the GXR. The team version was developed and ridden by professionals on the World Cup circuit and is now available for everyone. Offered in fast-paced neon colors the GXR Team is thinner, lighter and faster than the GXR. Utilizing a new and unique manufacturing process, the GXR Team is the first ergonomic lightweight grip made of AirCell Rubber. Super light, no clamp, no inner core, 100% made in Germany – the Ergon GXR Team defines a new chapter in lightweight MTB grips.
- Made in Germany
- Super light and ergonomic
- AirCell-Rubber for unparalleled cushioning and comfort
$29.95
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
$29.95
Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
- Length: 136mm
- Lock On: Yes
- Weight: 135g
Page 1 of 7
Next page