Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Handlebars

Specialized Alloy Mini Rise Handlebar
$45.00
The Specialized Alloy Mini Rise Handlebar is ideal for XC and All Mountain riding. - Width: 750mm, 780mm
Specialized S-Works DH Carbon Handlebar
$180.00
Getting the most out of mountain bikes requires leverage and proper positioning, and that's where a wide, low bar comes in. Specialized's S-Works DH Carbon Handlebar is wide, light, and stiff. It's crafted from Specialized's FACT carbon for minimal weight plus maximum strength and stiffness. Get the most out of your bike, go wide.
Specialized S-Works DH Carbon Handlebars
$180.00
The Specialized S-Works DH Carbon Handlebars are one seriously strong, but lightweight bar that will give the rider every advantage they can get with no compromise. - Specialized's widest, toughest FACT carbon bar for optimized blend of high durability and light weight. - Rise: 38mm (1.5") - Width: 780mm length - Bend: 6-degree upsweep, 8-degree backsweep - Clamp Diameter: Oversized 31.8mm
SQlab 30X 12-degree Carbon MTB Handlebar
$190.00
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
Race Face Aeffect R Handlebar
$54.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Race Face Atlas Riser Handlebar
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face NEXT 1/4-inch Riser Carbon Handlebar
$149.99 - $169.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
ENVE M6 Mountain Handlebar 31.8mm
$170.00
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M7 Mountain Handlebar 35mm
$170.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M9 Mountain Handlebar 31.8mm
$170.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Whisky Parts Co. No. 7 12F Drop Bar
$75.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 7 24f Drop Bar
$75.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 9 12f Drop Bar
$215.00
Whisky's No.9 12f is their most versatile carbon drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 9 24f Drop Bar
$215.00
Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky Parts Co. No. 9 Flat Bar
$140.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No. 9 Riser Bar
$140.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky Parts Co. No.7 6F Alloy Drop Bar
$75.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
Whisky Parts Co. No.9 Carbon Rise Handlebar
$150.00
Whisky Parts Co. carbon handlebars are tested to the highest standards to give you a high level of performance mile after mile. So keep the weight low and stay comfortable and in control while you shred with the Whisky Parts Co. No.9 Carbon Rise Handlebar. - 5 Degree Upsweep - 9 Degree Backsweep - Trimmable ends - Matte UD full carbon construction - 258 grams
Whisky Parts Co. No.9 Mountain Carbon Handlebar 35.0
$159.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
Wald 803 City Riser Bar
$12.98
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
Wald 8095 Touring Handlebar
$12.99
This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike - 1"(25.4mm) clamp, 2.5" rise, 23.75" wide - Handmade in Maysville, Kentucky
Wald 872 Handlebar
$18.00
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Made in the USA - Chrome finish - Weight: 526g - Lever Compatability: Mountain 22.2mm
Wald 898 Handlebar
$21.00
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 862g - Lever Compatability: Mountain 22.2mm
TruVativ Descendant 35mm DH Handlebar
$70.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
TruVativ Descendant 35mm Riser Handlebar
$70.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
TruVativ Descendant Carbon Riser Handlebar
$150.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
TruVativ Descendant Carbon Riser Handlebar
$160.00
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant CoLab Series Martin Soderstrom DH Riser Bar
$80.00
The Truvativ CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style - and to enhance each rider's cockpit interface. - Martin Soderstrom signature clean design with a reminder of his country’s colors and the dates and locations of his biggest crashes - Upsweep: 5 - Material: Aluminum
TruVativ Descendant Downhill Carbon Riser Handlebar
$180.00
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
TruVativ Descendant Downhill Riser Handlebar
$70.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
Page 1 of 6 Next page