Filter By:
Parts & Accessories

$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps

$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel

$31.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.

$26.99
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals

$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees

$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
- Weight (pair): 30 grams
- Shoe compatibility: SPD
- Release angle: 15 degrees

$25.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g

$24.99
A revolution in performance and reliability.
The kit includes premium internal components:
- Inner bearing o-ring x 2
- Spindle seal x 2
- Outer Igus solid bearing x 2
- Inner Igus solid bearing half x 4
- Bearing Retainer Bolt x 4
- Outer o-ring x 2
- Grease port screw x 2
- Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)

$24.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

$22.00
The Iclic fixed cleat works with all XPro and Xpresso pedals. This cleat is only available independently and is not included with new Xpro and Xpresso pedals. This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. It's compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
- Fits VP and Look Keo pedals (pedals sold separately)

$20.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g

$19.90
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

$19.00
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.

$19.00
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats.
- Not compatible with Shimano PD-M858 (XTR) SPD pedals

$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

$15.00
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface.
- Compatibility: KEO Grip/KEO Cleat
- Use: Protect the cleat

$15.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Lateral
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$15.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Multidirectional
- Clip in: 30% easier
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 430mm length

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- Poly leather (vegan) toe strap
- Velvet finish
- 450mm length

$10.25
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
- Includes 10 washers
Page 1 of 2
Next page