Filter By:
- Bottom Brackets (159)
- Brakes/Levers/Pads (437)
- Cassettes/Freewheels (88)
- Chainrings (232)
- Chains (50)
- Cranksets (214)
- Derailleurs (138)
- Forks (68)
- Show More Categories
- Handlebar Grips/Tape (170)
- Handlebars (83)
- Headsets (110)
- Pedals (113)
- Saddles (124)
- Seatposts (43)
- Shifters (98)
- Shocks (47)
- Stems (49)
- Other (1326)
- Tires/Tubes (514)
- Wheels (559)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Components
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers.
The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo.
Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.
Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could.
We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers.
- It is super leightweight (24g without clamp)
- It is made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved
- You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp
- It has an unrivaled finish and touch
- You have individual mounting points to adjust position
- It has an integrated cable tensioner
- Triggy can can clamp the cable by a set screw or it can hold the cable nipple and is compatible with any cable actuated dropper.
Features:
- Super leightweight (24g without clamp)
- Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved
- You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp
- Exceptional finish and touch
- Individual mounting points to adjust position
- Integrated cable tensioner
- 12.5 mm of maximum cable pull
1 set Triggy includes:
Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster)
Shift cable
Shift cable endcap
1x "Splits" clamp or I-Spec adapter (optional)
- Plastic guide and clamp with TPE elastomer for quiet, smooth chain retention
- Zip-Ties quickly onto a variety of chainstays
- Split design fits over the gear cable and chain, No disassembly required
- Pivoting chain tube follows the chainline on 2 or 3 chainring setups
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC49/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 76g
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8\EC49/40/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 97g
Replacement seals for servicing Cane Creek rear shocks.
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive.
- Spacers can be cut to fine-tune spring curve
Adjustment clamps are used to adjust bearing preload on Chris King hubs.
- Fits Chris King ISO SD Front, and Classic Rear
Kryptotal Front tire is optimized for the front wheel; this all around tire balances stability of grip, traction for braking and rolling resistance. Ideal for mixed terrain conditions for you to push your limits in trail, enduro or downhill gravity riding.
- Carcass construction is robust and impervious against damage and penetration from foreign objects, resulting in a versatile, low weight and an attractive design
- Pair with Kryptol Rear tire for optimum use
- Downhill Casing features a durable and reinforced carcass construction with supple and vivid characteristics
- Super Soft-Compound is the softest and grippiest compound in the MTB Gravity range. Especially for Downhill and Enduro use cases where the main focus is descending. Tires equipped with this compound are for riders with a 100% focus on grip, traction, control
- E25 e-bike rating features a high quality structure with puncture protection to reduce premature wear brought about by the additional driving force
CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry.
As our customers say, “It’s a no-brainer for E-MTBs.”
CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry.
As our customers say, “It’s a no-brainer for E-MTBs.”
CushCore E-MTB is specifically designed for the increased weight and forces of an E-mountain bike. With maximum impact protection and durability, you’ll ride more laps, with less fatigue, and less worry.
As our customers say, “It’s a no-brainer for E-MTBs.”
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6802 Bearing
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 15.4mm, for ratchet
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
ABI Headset Bearing for new builds or replacements.
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop!
Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness.
With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance.
Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise.
Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand.
Key Features:
- Tool-Free Reach Adjustment
- Flip-Flop Lever Orientation
- King Pin Pad Retention
- Crosshair Caliper Alignment
- Two-Stroke Dual-port bleed system
Specifications:
- 310g (100cm hose and mount hardware)
- DOT 5.1 Fluid
- Tool-Free Reach Adjustment
- 2-Stroke Dual Port Bleed System
- Sealed Cartridge Bearings Lever Pivot
- 100cm Front Hose Length
- 180cm Rear Hose Length
Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminium MTB cranks. The latest FEA analysis tools, rigorous lab testing and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested and manufactured in Barnoldswick, UK.
KEY FEATURES
- Updated for 2019, 15% lighter and stiffer than previous model
- Self-extracting axle/arm interface for ease of fittingVersatile Spline mount for chainring or spiderless chainrings
- 155, 165, 170 and 175mm length
- 30mm oversize 7075 aluminium alloy axle
- Arms available in black, silver, bronze, blue, red, purple and orange
- Range of axle length options available to accommodate most bikes from XC, DH and FAT bikes, including a new SuperBoost version
- Weight from: 560g, (170mm Inc axle)
- Forged and CNC machined 7150 series aluminium alloy crank arms
- Chainring mounting: 9, 10, 11 and 12 speed compatible
- Spiderless Retainer chainrings 28T to 36T
- Spider Single 104BCD and Double 64/104BCD (with provisional room for a bash guard on all spiders)
Hope Mono M6 Disc Brake Pads
• Organic: Softer compound than sintered, works better in dry conditions, but wears faster
• Sintered: high-graphite compound; best for wet-weather durability
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.
Shim set for fine-tuning the position of a Centerlock rotor on the hub.
- Ideal for swapping wheelsets without needing to re-adjust the brake caliper
- 0.2mm shim thickness
- Set of 10 shims
- Stainless steel construction
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
Complete remotes and remote components for KS dropper posts.
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
- Designed for use with MRP ISCG-05 boomerang chain guide systems
- Adapts ISCG-05 compatible chain guide to fit BB-mount (flange/lockring)
Magura type 6. 2 endurance pads for marta 2009-11 louise 2007-9 julie 2009
- Endurance series disc pads feature a harder organic compound than the Performance series, giving them a longer wear life but less power.
- Steel backing plate
The award-winning vibration damping of One Up Components carbon handlebars now available in aluminum\n
- Fine shot peened and anodized 7050-T76 aluminum alloy with glossy logos
- Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards
- Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips
- Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response
- Third party online sales are strictly prohibited by manufacturer
- A premium proprietary latex tire sealant formula featuring lightweight biodegradable ingredients; 119.6 grams for 4 ounces
- Contains multiple shapes and sizes of solid particles called nanites which quickly seal holes up to 1/4
- Performs in varying
The Charger 3.1 RC2 Piston Kit upgrades existing Charger 3 dampers to the NEW Charger 3.1. With increased damping range, Charger 3.1 RC2 is primed to take on any trail. Less compression damping in the Low Speed Compression open position and additional support in the High Speed Compression closed position gives you the traction, control, and comfort you need to charge dicey lines all day.
FEATURES
- Upgrades existing Charger 3 dampers to Charger 3.1
- Includes piston assembly, tuning shims, and Head Valve Tool
- Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) Charger 3 dampers
- High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments
Disc Brake Service Kit for 05-07 Juicy
- Includes pistons, seals, and bleed screws
Frame bumper stops from RockShox.
RockShox 32mm Seal Kit
RockShox Volume Reducer Kits
RockShox Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference.
RockShox Bottomless Tokens allow riders to easily custom tune their RockShox fork’s air-spring performance to best match their own riding style and suspension preference.
Page 1 of 77
Next page