Brakes/Levers/Pads

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

The eeBrake G4 is the fourth generation eeBrake featuring 100% CNC machined parts and a wider design optimized for 22-28mm rims. It features a stiffer black arch spring, a revised one-piece center adjuster with built-in resistance for easier use, and ghosted laser etching that will stand the test of time. All with the same stopping power and light weight that you've come to rely on from eeBrakes. - The eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation - The cross cable path aligns the brake cable over the center of the brake which provides a clean and aerodynamic line, moving the cables into the "wind shadow" of the frame - Tool-free caliper centering adjustability provides super-precision and pad motion consistency - One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire, allowing for easy wheel removal - Optimized to work with Shimano, Campagnolo, and SRAM levers

Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. - Pad Type: Replacement Insert-Cartridge - Intended Brake Type: Caliper - Rim Compatibility: Carbon

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

- cold forged aluminum sidepull brake with quick release - Standard pull rear, reverse pull front - Pads included

- Pad sets include pads and retraction spring for one caliper

Avid Elixir/SRAM DB Compatible Disc Brake Pads

SRAM Code Compatible Disc Brake Pads

Shimano XTR/XT/SLX 2-Piston Compatible Disc Brake Pads

alfer USA brake pads for use with Magura 4-Piston disc brake calipers. - The Galfer USA eBike specific compound was formulated to deal with the unique needs of E-Bikes - Long lasting and designed to manage heat and extra weight associated with eBikes and downhill bikes - Fits: Magura MT5 and MT7

Shimano 4-Piston Compatible Disc Brake Pads

SRAM Guide/G2 Compatible Disc Brake Pads

Every high-quality, Galfer-patented Wave® MTB/eBike 6-bolt disc rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Wave design comes from the Galfer motorcycle division and has been used across many disciplines at the highest level. Not compatible with Fulcrum AFS System. - Wave ® design keeps brakes extremely cool in demanding conditions - Made with a proprietary blend of 420 virgin stainless steel with high carbon content that provides better memory and friction - Laser cut to reduce the stress of the steel during production - 2.0mm thickness - Includes 6 mounting bolts - Precision made at the Galfer factory in Barcelona, Spain

Every high-quality Galfer-patented Wave® rotor is made from a proprietary mix of virgin high carbon 420 stainless steel laser cut (never stamped) double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Precision made in the Galfer factory in Spain. - Rotors are designed to provide a greater resistance for reliable braking - 2.0mm thickness and Joint Geometry offers greater rigidity and thermal stability - *Please confirm that your disc brake caliper is compatible with 2.0mm thick rotors

Galfer's fixed version of the Disc Shark® is one of the most complete MTB brake disc available today. Its innovative manufacturing process uses laser cutting to create the optimal design geometry and achieve the best possible performance. One of the disc’s unique characteristics is the inner fin that gives it it's name: Disc Shark®. These fins, together with the rotor’s small internal round holes allow the operating temperature of the disc to be reduced, while the rotor’s exterior Wave design and lateral openings give it a powerful and homogeneous grip over the full contact area of the brake pad. - Drastically reduces operating temperature by 30% compared to many of the other high-end brake discs on the market - Increases brake pad life 25-40% under normal conditions - Designed to require less brake line pressure under the most extreme conditions, meaning less effort required for braking - Lighter than most other high-end brake discs on the market thanks to the optimized design - Maintains stable and consistent behavior at all times - 2.0mm disc thickness

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Caliper Mounting Bolts for Hayes hydraulic disc brake systems.

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Replacement levers pivots pin kit for Hayes hydraulic disc levers