Suspension

Frame bumper stops from RockShox.

- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork

A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"

An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote - Solo Air spring

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

The RockShox Paragon suspension fork combines the premium level of performance and features mountain bikers have come to expect from RockShox, now with a purpose-built 700c trekking design. Its lightweight, infinitely tunable Solo Air spring and Motion Control damper allow the rider to fine tune the fork for those cherished stretches of either path or pavement. Paragon’s thoughtful design combines a unique light mount on the fork brace and fender and rim/disc specific mounts integrated into the fork legs. Even the dynamo wiring runs under a sleek integrated cover up the fork leg, keeping it safe and concealed. Paragon makes trekking both smart and simple. - Standard with Motion Control damping featuring low speed compression adjustment - Integrated mounts for fenders - Unique light integration at the fork brace - Integrated wiring and cable management for running a dynamo - Crown Race: 30mm - Offset: 46mm - Steerer Tube Length: 262mm - Positive Spring: Air - Negative Spring: Air - External Adjustments: Rebound Damping , Low Speed Compression Damping - Maximum Tire Width: 45mm

The RockShox Recon Silver: a fork with the performance that'll help you beat your riding buddies without beating up your checking account. Sturdy 32-millimeter stanchions, stiff, forged aluminum crown, and dependable Solo Air spring make Recon Silver the fork you've been looking for. Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, and the Turn Key oil damping system offers external rebound adjustment and compression lockout for on-the-trail adjustability. - PopLoc compatible - 2.4" (62mm) maximum tire width - Crown Race: 30mm - Offset: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 26" - Stanchion Diameter: 32mm

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, Recon Silver is an all-around performer suited for any MTB. Features - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look - Includes Right OneLoc Remote

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

An entry level fork with the latest features and performance; Judy Silver is built around a brand new chassis derived from the Pike, works with Plus tires up to 2.8 in both the 27.5" and 29" models. Judy Silver features the Motion Control RL damper and is compatible with OneLoc remotes and has Fast Black upper tubes for an all-black look and low friction performance. - 80-120mm travel - External rebound - TurnKey lockout controls - Fast Black upper tubes - Motion Control RL damper - Compatible with OneLoc remote

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

The all-new Bomber DJ is back in the mix with a whole new bag of tricks. Sharing the same 36mm chassis as its big brother, the Z1, the DJ comes in a dedicated 26" wheel configuration. Featuring a 20x110mm axle, the DJ is designed for maximum stiffness and offers seamless compatibility with existing DJ and DH front hub spacing standard. - Dedicated 26" wheel configuration delivers shortest possible crown height for flickable front end - Legendary Bomber durability with 36mm stanchions - Buttery and easy-to-use GRIP damper - Tapered steerer tube for maximum stiffness - Adapters available for 15 x 100mm axle - 1.5 Tapered steerer - Offset: 37mm

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

One of the most successful and hard-working RockShox forks of all times capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

Yari shares the stiff, hard-hitting chassis as the Lyrik and combines it with the updated DebonAir air spring and proven Motion Control damper. The Yari fork is designed to inspire confidence for those hard-hitting enduro and E-MTB riders alike. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New graphics package for a fresh, premium look - Motion Control damping featuring low-speed compression adjustment

When mountain bike suspension first hit the ground, things were simpler. The best bike was the one you were riding; uphill, downhill, quick laps or all-day epics. The Bomber Z2 revives this purist mindset with a smooth and plush mountain bike fork that’s ready to ride out of the box. Trail riders rejoice — your low maintenance, high durability solution is here, and it’s worthy of the name Bomber. Long live fun. Features Limited Edition colorway Stiff 34mm chassis for precise steering and traction Low maintenance Rail Damper for intuitive compression adjustment ?Simple rebound adjustment for the set-and-forget rider

Not that long ago mountain bikes were simple. Suspension opened up more terrain and, more importantly, it meant more fun. The original Z2 was there for the mountain bike suspension revolution. You simply mounted it on your bike and hit the trails. Less time prepping and fixing meant you could just focus on the ride. Twenty years later, that same DNA lives on in the new Marzocchi Z2, and it's ready to shred, offering smooth and plush suspension. The new-from-the-ground-up Rail damper combines low maintenance with intuitive ease of use and impressive on-trail performance. The top-of-fork simple sweep adjuster from firm to open can lock out the fork or fully open the system with plenty of positions in between. The Z2—it just makes everything easy. - 34mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QRx110mm axle design - Air sprung - Rail damper - Rake: 44mm

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Hello Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Welcome Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. Features - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment - Offset: 40mm

Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes. - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Motion Control damping featuring low-speed compression adjustment to firm - Chassis is derived from the renowned Pike fork - New graphics package for a fresh, premium look

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control™ damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low-speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers. - Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included) - Noise management system for near silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster to dial-in sag and firmness off the top - Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers - Additional springs sold separately to fine-tune and adjust for rider preference - Rake: 44mm

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package

An all-around cross-country workhorse. Featuring proven FOX performance and dependability, you can count on 32. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper with three-position on-the-fly adjustability. - FLOAT EVOL air spring - Lockout for increased efficiency - FIT GRIP 3-Position Lever damper - Performance Series black-on-black graphics package

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New, price point Charger R cartridge damper featuring an easy-to-adjust damper with just rebound adjustment - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring

Riders asked for it, Marzocchi heard the call and proudly delivered a coil mountain bike fork worthy of its legendary predecessor. The Z1 Coil builds on the strong legacy of the original Bomber Z1 from the ‘90s that helped fuel the freeride movement. Weight weenies need not apply. Features: - Stout and proven 36mm chassis - GRIP damper - Ultra-lightweight tempered silicon-chromium steel spring, wrapped for near-silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster - Adjustable travel in 10mm increments with included internal spacers

We designed the Bomber Z1 for riders ready to get rowdy. Silky smooth travel with the traction and stiffness where it matters. It’s not about counting seconds or fiddling with settings at the top of the enduro course. It’s pointing your bike down the line with the confidence that your suspension has your back. Bikes are fun. And so is the Bomber Z1. Features Limited Edition colorway Stout and proven 36mm chassis Intuitive compression sweep adjustment, from locked out to full open Simple rebound adjustment for the set-and-forget rider GRIP damper

Diamond For The Rough. In a time where standards are being reinvented every day, it's important to look through the clutter to find clarity. Find out what's actually here to stay and make an impact. We start with a simple question: What's going to improve the product and rider? The new Diamond has a host of features to cater to the aggressive rider who demands more. We gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing that amplifies steering precision and control in the moments of "ultimate shred". We also increased the tire clearance, allowing you to utilize a bigger tire and still have clearance for mud. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic which means the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really get the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping

For all the ups, downs and to get you to everything in between. Lyrik Select combines an updated DebonAir air spring with the trusted Charger RC damper for unmatched trail control and precision. Maxima Plush fluid reduces friction, silences noise, and provides all-around lasting performance. Features: - Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper featuring low speed compression adjust - Maxima Plush damping fluid reduces friction and silences damper noise

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

An ultra-lightweight XC weapon. 32 Step-Cast's pioneering lower leg shape isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - 44mm offset - Black anodized upper tubes - 32mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)

Riders asked for it, Marzocchi heard the call and proudly delivered a coil mountain bike fork worthy of its legendary predecessor. The Z1 Coil builds on the strong legacy of the original Bomber Z1 from the ‘90s that helped fuel the freeride movement. Weight weenies need not apply. Features Limited Edition colorway Stout and proven 36mm chassis GRIP damper Ultra-lightweight tempered silicon-chromium steel spring, wrapped for near-silent performance Integrated air assist for progressivity and bottom out control External preload adjuster Adjustable travel in 10mm increments with included internal spacers

34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. 34 E-Bike Performance forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - 44mm offset - Black anodized upper tubes - FIT GRIP damper and FLOAT air spring - E-Bike Chassis - Performance Series black-on-black graphics package

34 is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. 34 E-Bike Performance forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - 44mm offset - Black anodized upper tubes - FIT GRIP damper and FLOAT air spring - E-Bike Chassis - Performance Series black-on-black graphics package

- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Designed for trail riding, the Factory Performance 34 features a FIT GRIP damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Performance Series black-on-black graphics package

E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter

The ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance anywhere you need it to be. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper features low-speed compression adjustment - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

Podium performance: tailor made for the rigors of modern XC racing. The lightest 34 ever, the all-new 34 Step-Cast is designed from the ground up to deliver uncompromising XC race performance with class-leading tunability, chassis stiffness and strength. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - 44mm offset - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

The new Rudy is a perfect match for your gravel bike. It's energy-efficient for straightaways and offers enough travel to keep you comfortably in control when things get rough. Featuring all-new 30mm upper tubes built around the Charger Race Day damper (our lightest damper ever) and our proven SoloAir spring. Rudy offers precise steering, full or short fender compatibility, and the looks to make your road bike proud. Everything designed with the needs of gravel riders in mind. - Purpose-built and laser-focused on gravel and e-gravel bikes - 30mm upper tubes are light and look the part - 30mm and 40mm travel options - Charger Race Day damper tuned for gravel needs with rock-solid lockout and a full range of rebound adjust - Solo Air spring perfectly tuned for shorter travel and efficiency over bumps - Short fender compatibility with a 3-bolt system - Full fender compatibility with custom stealth stay bosses - Lightweight machined and anodized crown offers a premium and durable finish - Maxima Plush damping fluid reduces friction and silences damper noise - Up to 700x50 tire clearance - Available in new Kwiqsand Signature colorway or Gloss Black - E-bike approved

Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Designed for trail riding, the Factory Performance Elite 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. - 44mm offset - Black anodized upper tubes - FIT4 damper and FLOAT EVOL air spring - Performance Series black-on-black graphics package

The undisputed all-mountain champion. The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. 36 E-Bike Performance forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Black anodized upper tubes - FIT GRIP damper and FLOAT air spring - E-Bike Chassis - Performance Series black-on-black graphics package

This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference